How to Start Ford Explorer When Key Fob is Dead
Starting your Ford Explorer when the key fob is dead can be a frustrating experience, but with a few simple steps, you can get back on the road in no time. Whether you’ve lost your key fob or it’s simply out of battery, this guide will help you restart your vehicle without any trouble.
Step 1: Locate the Emergency Key
First, check if you have an emergency key or a spare key. This key is typically hidden in the vehicle, often under the driver’s seat or in the glove compartment. If you find the emergency key, remove it from its hiding spot.
Step 2: Insert the Emergency Key
Locate the ignition switch in your Ford Explorer. It is usually located on the left side of the steering column. Insert the emergency key into the ignition switch and turn it to the “On” position. If the engine starts, you can proceed to the next step. If not, try inserting the key again.
Step 3: Access the Key Fob Battery
If the emergency key doesn’t work, you may need to access the key fob battery. The battery is usually located inside the key fob itself. To access it, you will need a small flathead screwdriver. Carefully remove the back cover of the key fob and locate the battery.
Step 4: Replace the Battery
Once you have accessed the battery, remove it and replace it with a new one. Make sure to use the correct type of battery, as specified in your vehicle’s manual. After replacing the battery, reassemble the key fob and try it again.
Step 5: Use the Key Fob to Start the Vehicle
If the key fob is still not working, you may need to use the key fob to start the vehicle. Most Ford Explorers have a key fob start button located on the dashboard. Press the button and wait for the engine to start.
Step 6: Reconnect the Key Fob
Once the vehicle is running, you can reconnect the key fob to the vehicle. This will allow you to use the key fob to start the vehicle in the future. To reconnect the key fob, simply press the “lock” button on the key fob and hold it for a few seconds. The vehicle will respond by locking and unlocking the doors.
Conclusion
Starting your Ford Explorer when the key fob is dead can be a challenging task, but with these simple steps, you can overcome the problem and get back on the road. Always keep a spare key or emergency key handy to avoid any inconvenience in the future.
