How to Change Blade on Cricut Explore
Changing the blade on your Cricut Explore is a straightforward process that ensures your cutting machine remains in top condition. Whether you’re dealing with a dull blade or need to switch to a different type of blade for a specific project, this guide will walk you through the steps to safely and effectively change the blade on your Cricut Explore.
1. Gather the Necessary Tools
Before you begin, make sure you have the following tools on hand:
– Replacement blade
– Blade cover
– Hex wrench (usually included with the blade)
– Cricut Explore cutting machine
2. Power Off and Unplug the Machine
For safety reasons, always ensure your Cricut Explore is powered off and unplugged before attempting to change the blade. This will prevent any accidental cuts or damage to the machine.
3. Remove the Blade Cover
Locate the blade cover on the back of your Cricut Explore. It is typically held in place by a single screw. Use the hex wrench to remove the screw and lift off the blade cover.
4. Remove the Old Blade
Once the blade cover is removed, you will see the old blade. Using the hex wrench, gently loosen the screw that holds the blade in place. Once the screw is loose, carefully pull the old blade out of the machine.
5. Insert the New Blade
Take your new blade and align it with the slot in the blade holder. Make sure the blade is oriented correctly and fits securely into place. Then, tighten the screw with the hex wrench to secure the new blade.
6. Replace the Blade Cover
With the new blade in place, replace the blade cover. Make sure it is securely fastened by reattaching the screw with the hex wrench.
7. Test the Blade
Power on your Cricut Explore and test the new blade by running a test cut. This will ensure that the blade is working properly and that your machine is ready for your next project.
8. Clean and Store Your Tools
After changing the blade, take a moment to clean any debris or lint from the blade holder and surrounding area. Store your tools in a safe place for future use.
By following these simple steps, you can easily change the blade on your Cricut Explore and keep your cutting machine in excellent condition. Happy crafting!
