How to Replace Battery Key Fob Ford Explorer
Replacing the battery in your Ford Explorer’s key fob is a task that many owners may find themselves needing to do at some point. Whether the battery has simply worn out over time or has been damaged, this guide will walk you through the process of replacing the battery in your key fob, ensuring that you can continue to access your vehicle without any inconvenience.
Materials Needed:
Before you begin, gather the following materials:
– Replacement battery (typically a CR2032)
– Small flathead screwdriver
– Replacement key fob (if the original is damaged beyond repair)
Step 1: Power Off Your Vehicle
Ensure that your Ford Explorer is turned off and the keys are removed from the ignition. This will prevent any accidental triggering of the key fob functions during the battery replacement process.
Step 2: Remove the Key Fob from the Vehicle
Locate the key fob holder in your Ford Explorer, which is typically located on the driver’s door. Remove the key fob from the holder by pressing the release button and sliding it out.
Step 3: Open the Key Fob
Using the small flathead screwdriver, gently pry the back cover of the key fob open. Be careful not to apply too much force, as the cover is usually made of plastic and can be fragile.
Step 4: Remove the Old Battery
Once the back cover is open, you will see the old battery. Use the flathead screwdriver to carefully lift the battery out of its compartment. Take note of the orientation of the battery, as you will need to replace it in the same position.
Step 5: Insert the New Battery
Place the new CR2032 battery into the compartment, ensuring that it is oriented in the same way as the old battery. The positive side of the battery should be facing up.
Step 6: Close the Key Fob
Once the new battery is in place, close the back cover of the key fob. Make sure it is securely latched before proceeding.
Step 7: Reinstall the Key Fob
Slide the key fob back into the holder in your Ford Explorer. Press the release button until you hear a click, indicating that the key fob is securely in place.
Step 8: Test the Key Fob
Turn on your Ford Explorer and test the key fob to ensure that it is functioning properly. Press the buttons on the key fob to lock, unlock, and start the vehicle, as well as to check for any other features it may have.
Conclusion:
Replacing the battery in your Ford Explorer’s key fob is a straightforward process that can be completed in just a few simple steps. By following this guide, you can ensure that your key fob remains functional and continue to enjoy the convenience of keyless entry and start in your vehicle.
