How to Open Ford Explorer Trunk with Foot
Opening the trunk of a Ford Explorer with your foot can be a convenient feature, especially when your hands are full or you’re carrying heavy items. This hands-free operation can make loading and unloading easier and more efficient. Here’s a step-by-step guide on how to open the Ford Explorer trunk using the foot release system.
Step 1: Locate the Trunk Release Pedal
First, you need to find the trunk release pedal, which is typically located on the driver’s side floorboard. It is usually marked with a trunk icon or the word “Trunk.” If you can’t see it, look under the dashboard or check the owner’s manual for the exact location.
Step 2: Position Your Foot Correctly
Place your foot on the trunk release pedal. Make sure your foot is flat and the pedal is fully pressed down. The position of your foot may vary depending on the model of your Ford Explorer, so adjust accordingly.
Step 3: Hold the Pedal Down
While your foot is on the pedal, hold it down firmly. This will trigger the trunk release mechanism.
Step 4: Open the Trunk
With the pedal held down, you should hear a click or feel a slight resistance as the trunk latch releases. The trunk lid will then open automatically. If it doesn’t open, make sure you are pressing the pedal down with enough force.
Step 5: Load or Unload Your Items
Once the trunk is open, you can load or unload your items. Be sure to secure any heavy or oversized items to prevent them from falling out when you close the trunk.
Step 6: Close the Trunk
To close the trunk, simply press the trunk lid down until it latches. If the trunk doesn’t close properly, make sure there are no items blocking the latch or the lid.
Conclusion
Opening the Ford Explorer trunk with your foot is a simple and convenient feature that can make your life easier. By following these steps, you can quickly and easily access your trunk without the need to use your hands. Always remember to secure your items properly to prevent any accidents or damage.
