How to Change Key Fob Battery Dodge Challenger
If you own a Dodge Challenger, you might find yourself in a situation where you need to change the battery in your key fob. This is a common issue that can arise after some time, and it’s important to address it promptly to ensure the functionality of your keyless entry system. In this article, we will guide you through the process of changing the key fob battery in a Dodge Challenger, step by step.
Step 1: Gather the Necessary Tools
Before you begin, make sure you have the necessary tools for the job. You will need a small flathead screwdriver, a pair of needle-nose pliers, and a replacement battery. The battery size for most Dodge Challenger key fobs is CR2032.
Step 2: Locate the Battery Compartment
To access the battery, you need to locate the battery compartment in your key fob. This is usually found on the back of the key fob, where the battery is housed. Check the key fob for any visible openings or labels indicating the battery compartment.
Step 3: Remove the Back Cover
Using the flathead screwdriver, gently pry open the back cover of the key fob. Be careful not to apply too much force, as you might damage the plastic. Once the cover is loose, slide it off to reveal the battery.
Step 4: Remove the Old Battery
With the back cover removed, you can now see the battery. Use the needle-nose pliers to carefully remove the old battery from its compartment. Be sure to hold the battery by its edges to avoid damaging the contacts.
Step 5: Insert the New Battery
Take the new CR2032 battery and insert it into the compartment, making sure the positive (+) side of the battery is facing up. The battery should fit snugly into the compartment.
Step 6: Reassemble the Key Fob
Once the new battery is in place, reattach the back cover of the key fob. Use the flathead screwdriver to gently push the cover back into place, ensuring it is secure.
Step 7: Test the Key Fob
With the key fob reassembled, test it to make sure the battery change was successful. Try pressing the buttons on the key fob to see if the keyless entry system is functioning properly.
By following these simple steps, you can easily change the key fob battery in your Dodge Challenger. Remember to keep the battery compartment clean and free of debris to prevent any future issues. If you encounter any difficulties or if the key fob still doesn’t work, it may be necessary to consult a professional for further assistance.
