How to Add Inside Pocket to Jacket
Adding an inside pocket to a jacket can be a simple yet effective way to enhance its functionality and add a touch of personal style. Whether you’re modifying an existing jacket or creating a new one from scratch, the process can be both rewarding and straightforward. In this article, we’ll guide you through the steps to add an inside pocket to a jacket, ensuring that it fits seamlessly and adds practicality to your garment.
Materials Needed
Before you begin, gather the following materials:
– Measuring tape
– Fabric (matching the jacket’s fabric or a contrasting color)
– Scissors
– Pinking shears (optional)
– Pins
– Sewing machine or needle and thread
– Iron and ironing board
– Seam ripper (if necessary)
Choosing the Location
The first step is to decide where you want to place the inside pocket. Common locations include the left or right side seam, the upper arm seam, or even the back seam. Measure the desired location and mark it on the jacket with a pin or fabric pen.
Creating the Pocket Pattern
Once you’ve chosen the location, create a pattern for the inside pocket. This can be done by drawing a rectangle on paper that matches the desired dimensions of the pocket. If you’re adding a flap, include a section for the flap as well. Remember to add seam allowances to your pattern.
Prepping the Jacket
Turn the jacket inside out and place it on the ironing board. Press all the seams flat and ensure that the jacket is as smooth as possible. This will make it easier to sew the pocket in place.
Attaching the Pocket
1. Pin the pocket pattern to the jacket fabric, ensuring that the edges align with the marked location.
2. Cut out the pocket pieces, including any flaps, following the pattern.
3. Pin the pocket pieces to the jacket, aligning the edges and ensuring that the pocket is the correct size.
4. Sew the pocket pieces to the jacket, using a 1/4-inch seam allowance. If you’re using a sewing machine, set the stitch length to a shorter length to ensure that the pocket stays in place during wear.
5. If you’re adding a flap, sew the flap to the top of the pocket and then sew the flap to the jacket.
Finishing Touches
Once the pocket is attached, trim any excess fabric and thread, and press the seams flat. If desired, you can add a button or buttonhole to the flap for added closure.
Conclusion
Adding an inside pocket to a jacket is a straightforward process that can greatly enhance the functionality of your garment. By following these steps and using the right materials, you can create a custom pocket that fits perfectly and adds a personal touch to your jacket. Whether you’re a seasoned seamstress or a beginner, adding an inside pocket is a project that can be enjoyed by all.
