How to Make Pot Holders with Pockets
Are you looking for a unique and practical way to add a touch of creativity to your kitchen? Look no further! Pot holders with pockets are not only a stylish accessory but also a convenient tool for holding hot pots and pans. In this article, we will guide you through the process of making pot holders with pockets, so you can enjoy the benefits of this handy kitchen gadget. Let’s get started!
Materials Needed
Before diving into the crafting process, gather the following materials:
1. Fabric: Choose a durable fabric that can withstand heat, such as cotton or canvas.
2. Pockets: You can either purchase pre-made pockets or create your own using fabric scraps.
3. Thread: A strong, heat-resistant thread is essential for sewing.
4. Sewing machine: If you have one, it will make the process much quicker and more precise.
5. Scissors: For cutting the fabric and pockets.
6. Pins: To hold the fabric in place while sewing.
7. Measuring tape: To ensure the pot holders are the right size.
Step 1: Cutting the Fabric
Start by measuring and cutting the fabric according to the desired size of your pot holders. For a standard size, you’ll need two pieces of fabric measuring approximately 10 inches by 12 inches each. If you’re creating your own pockets, cut two pieces of fabric for the front and back of the pocket, each measuring 6 inches by 8 inches.
Step 2: Sewing the Pockets
Place the two pocket pieces right sides together and sew around the edges, leaving a small opening for turning. Clip the corners, turn the pocket right side out, and press it flat with an iron. Topstitch around the edges of the pocket to reinforce it.
Step 3: Attaching the Pockets
Position the pockets on the front piece of the pot holder fabric, ensuring they are centered and evenly spaced. Pin the pockets in place and sew them to the front piece of fabric, using a 1/2-inch seam allowance.
Step 4: Sewing the Pot Holders Together
Place the front and back pieces of the pot holder fabric right sides together. Sew around the edges, leaving a small opening for turning. Clip the corners, turn the pot holders right side out, and press them flat with an iron.
Step 5: Closing the Opening
Fold the opening of the pot holders inward and pin it in place. Topstitch around the edges to close the opening and reinforce the seam.
Step 6: Finishing Touches
Your pot holders with pockets are now complete! You can add any additional decorations, such as buttons or embroidery, to personalize your creation. Enjoy using your new, stylish, and practical kitchen accessory!
In conclusion, making pot holders with pockets is a fun and rewarding project that will add a touch of personality to your kitchen. With just a few simple steps and some basic materials, you can create a unique and useful item that will make cooking a more enjoyable experience. Happy crafting!
