How to Add Inside Pocket to Jacket
Adding an inside pocket to a jacket can not only enhance its functionality but also add a touch of elegance. Whether you’re working on a DIY project or looking to customize a purchased jacket, this guide will walk you through the steps to add an inside pocket with ease.
Materials Needed
Before you begin, gather the following materials:
– Fabric: The same fabric as the jacket or a complementary fabric for the pocket.
– Sewing machine or needle and thread.
– Scissors.
– Pattern paper or fabric marker.
– Measuring tape.
– Pins.
– Pocket bag or a piece of fabric to create the pocket bag.
Step 1: Measure and Cut the Pocket Fabric
First, determine the size of the pocket you want to add. Measure the distance from the edge of the jacket to where you want the pocket to sit. This will be the length of the pocket. For the width, consider the depth of the pocket and add an extra inch for seam allowances.
Lay out your pattern paper or fabric marker on a flat surface and mark the dimensions of the pocket. Cut out the fabric according to the marked measurements.
Step 2: Prepare the Pocket Bag
If you’re using a pocket bag, skip this step. Otherwise, cut a piece of fabric that is large enough to create the pocket bag. Fold the fabric in half lengthwise with the right sides facing each other. Sew the sides and bottom of the fabric, leaving the top open. Turn the fabric right side out and press it flat with an iron.
Step 3: Attach the Pocket to the Jacket
Position the pocket on the inside of the jacket where you want it to be placed. Mark the center of the pocket with a pin or fabric marker. Find the corresponding spot on the jacket’s lining and mark it as well.
Pin the pocket to the lining, ensuring that the edges are aligned. Using a sewing machine or a needle and thread, sew the pocket to the lining, securing it in place. Be sure to leave the top of the pocket open for ease of access.
Step 4: Reinforce the Pocket
To ensure that the pocket stays in place, reinforce the stitching by topstitching around the edges of the pocket. This will add strength and give the pocket a finished look.
Step 5: Add any Additional Features
If desired, add a button or snap to the top of the pocket for closure. Sew the button or snap in place, making sure it is securely attached to both the pocket and the jacket lining.
Conclusion
Congratulations! You’ve successfully added an inside pocket to your jacket. This addition will not only make your jacket more functional but also showcase your sewing skills. With a bit of practice, you can add various styles and sizes of pockets to any jacket, making it uniquely yours.
