How to Tie Walt’s Worm: A Step-by-Step Guide to a Classic Fishing lure
Fishing enthusiasts often seek the perfect lure to entice fish, and one of the most effective and classic fishing lures is Walt’s Worm. Whether you’re a beginner or an experienced angler, learning how to tie Walt’s Worm can greatly enhance your fishing experience. In this article, we will provide a step-by-step guide on how to tie Walt’s Worm, ensuring that you have a lure that will catch the attention of even the most elusive fish.
Materials Needed:
Before we dive into the tying process, it’s essential to gather all the necessary materials. Here’s what you’ll need:
1. Soft plastic worm body (typically in a worm shape)
2. Wire or monofilament thread
3. Scissors
4. A pair of needle-nose pliers
5. A pair of fishing line cutters
6. A small amount of silicone or super glue (optional)
Step 1: Cut the Worm Body
Start by cutting the soft plastic worm body to the desired length. A standard length for Walt’s Worm is about 4-6 inches. Use the scissors to make a clean, straight cut.
Step 2: Thread the Worm Body
Take a piece of wire or monofilament thread and thread it through the worm body. Push the thread through the center of the worm until it comes out the other side. The thread will serve as the backbone for the lure.
Step 3: Secure the Thread
Once the thread is through the worm body, tie a basic overhand knot to secure the thread in place. Be sure to leave a small loop at the end of the thread, as this will be used to attach the fishing line.
Step 4: Create the Hinge
Take the needle-nose pliers and pinch the thread at the loop, creating a small, tight knot. This will form the hinge of the lure. The hinge is crucial for the worm’s natural swimming action.
Step 5: Attach the Wire or Monofilament Thread
Now, take the wire or monofilament thread and thread it through the hinge knot. Push the thread through until it comes out the other side, creating a loop.
Step 6: Attach the Hook
Using the needle-nose pliers, pinch the thread at the loop, creating a tight knot. Once the knot is secure, thread the hook through the loop and push it through the worm body. The hook should be positioned about halfway down the worm.
Step 7: Adjust the Hinge
Using the needle-nose pliers, pinch the thread at the hinge, creating a tight knot. This will ensure that the hinge is secure and the worm will move naturally when retrieved.
Step 8: Trim the Excess Thread
Use the fishing line cutters to trim any excess thread, leaving a small amount of thread for adjustments if needed.
Step 9: Apply Silicone or Super Glue (Optional)
If desired, apply a small amount of silicone or super glue to the thread and hook junction to provide additional strength and durability.
Congratulations! You have successfully tied a Walt’s Worm. This classic fishing lure is sure to attract a variety of fish species and can be customized with different colors and sizes to suit your preferences. Happy fishing!
