How to Make a Homemade Sand Flea Rake
Sand fleas, also known as beach fleas, can be a nuisance at the beach, causing discomfort and itching to beachgoers. To protect yourself and your family from these pesky insects, a homemade sand flea rake can be a useful tool. In this article, we will guide you through the process of making a simple and effective sand flea rake using readily available materials.
Materials Needed:
1. A long, flat piece of wood or plastic (about 2 feet long)
2. A saw or a knife
3. A pair of sandpaper or a sanding block
4. A drill and a drill bit
5. A piece of string or a rope
6. A hammer and nails or screws
7. Optional: a small bucket or container to hold the sand fleas
Instructions:
1.
Choose the Material:
Select a long, flat piece of wood or plastic. The material should be sturdy enough to handle the sand and durable enough to last for several beach visits.
2.
Shape the Rake:
Using a saw or a knife, cut the wood or plastic into a long, flat strip. The length of the strip will depend on your preference, but a length of about 2 feet is a good starting point.
3.
Smooth the Edges:
Sand the edges of the wood or plastic strip to ensure they are smooth and do not cause any injuries while using the rake.
4.
Drill Holes:
Using a drill and a drill bit, drill a series of holes along the length of the strip. These holes will serve as guides for the string or rope, which will help in holding the sand fleas.
5.
Attach the String or Rope:
Thread a piece of string or rope through the holes you have drilled. Secure the string or rope at both ends of the strip using a hammer and nails or screws. Make sure the string or rope is tight enough to hold the sand fleas but not too tight to cause discomfort.
6.
Optional: Add a Container:
If you wish to collect the sand fleas, you can attach a small bucket or container to the end of the string or rope. This will allow you to easily collect the sand fleas and dispose of them.
7.
Test the Rake:
Before heading to the beach, test the homemade sand flea rake by using it in your backyard or garden. This will help you get a feel for how it works and make any necessary adjustments.
Using the Homemade Sand Flea Rake:
To use the homemade sand flea rake, simply drag it through the sand at the beach. The string or rope will help you collect the sand fleas, which you can then dispose of in a bucket or container. Be sure to check the sand frequently, as sand fleas can be difficult to spot.
By following these simple steps, you can create a homemade sand flea rake that will help you enjoy your beach trips without the worry of sand fleas. Happy beaching!
