How to Make a Wired Controller Wireless for Nintendo Switch
Are you tired of the hassle of wires while playing your favorite Nintendo Switch games? Do you wish to have the freedom of movement without the inconvenience of tangled cables? Well, you’re in luck! In this article, we will guide you through the process of making your wired controller wireless for the Nintendo Switch. By following these simple steps, you can enjoy a seamless gaming experience without the need for wires.
Understanding the Process
Before we dive into the steps, it’s important to understand the process of making a wired controller wireless. The Nintendo Switch uses a proprietary wireless technology called “Nintendo Switch Pro Controller” for its controllers. To make a wired controller wireless, we will need to replace the existing wireless module with a compatible one that supports the Nintendo Switch’s wireless protocol.
Materials Needed
To get started, you will need the following materials:
1. A compatible wireless module: Look for a module that supports the Nintendo Switch’s wireless protocol, such as the Ralink RT5370 or the Realtek RTL8723BS.
2. A soldering iron and solder: You will need these tools to connect the new wireless module to the controller’s circuit board.
3. A multimeter: This will help you check the connections and ensure that everything is working correctly.
4. A heat gun or a hair dryer: You may need these tools to heat up the adhesive holding the old wireless module in place.
5. A pair of needle-nose pliers: These will come in handy for manipulating small components.
Step-by-Step Guide
Now that you have all the necessary materials, let’s get started with the steps to make your wired controller wireless:
1. Disassemble the Controller: Carefully disassemble the wired controller by removing the screws and separating the outer shell from the internal components.
2. Identify the Wireless Module: Locate the existing wireless module inside the controller. It is usually located near the battery and may be held in place with adhesive.
3. Remove the Old Wireless Module: Use the heat gun or hair dryer to heat up the adhesive and carefully remove the old wireless module. Be cautious not to damage any other components.
4. Prepare the New Wireless Module: Solder the new wireless module to the controller’s circuit board. Ensure that the connections are secure and follow the manufacturer’s instructions for the specific module you are using.
5. Test the New Wireless Module: Use the multimeter to check the connections and ensure that the new wireless module is functioning correctly.
6. Reassemble the Controller: Once you have confirmed that the new wireless module is working, reassemble the controller by putting the outer shell back together and securing it with the screws.
7. Pair the Controller: Connect the controller to your Nintendo Switch using the pairing process. The Switch should recognize the new wireless controller as a compatible device.
Conclusion
Congratulations! You have successfully made your wired controller wireless for the Nintendo Switch. Now you can enjoy a more comfortable and convenient gaming experience without the hassle of wires. Remember to handle the controller with care and follow the manufacturer’s guidelines to ensure the longevity of your modified controller. Happy gaming!
